Tag: Conservation

  • Water Conservation Tips For The Yard And Garden

    One of the biggest water wasters in the average yard is the grass lawn.  If you live in a drought prone area consider eliminating or reducing the size of your lawn.  Grassy areas can be replaced with water conserving plants, gravel, or even artificial turf.  Areas that are kept as grass lawns may be made more water efficient by simply letting the grass grow a bit longer.  Grass cut short is very water intensive, while longer grass is generally much healthier.  Grass in shadier areas will usually use less water than grass in full sun.  If you decide to eliminate some of your lawn you may get the best savings by eliminating the sunniest sections.  Finally, some varieties of grass need far less irrigation than others to stay green. If you do keep a large lawn consider researching varieties that are best for conservation in your area and switch to one of those.

    For plants in non lawn areas look at “water wise” choices for your area.  Most garden centers will have a section devoted to these plants.  They may have experts on staff or even classes.  You can also find low maintenance plants by noticing what does well in your neighborhood with minimal irrigation.  If a plant does well in your neighbor’s yard chances are it will do well in yours.  Do be sure to notice the conditions in your neighbor’s yard, as a plant happy in shade might not survive in full sun.  Finally, look at what native plants are available in your area.  These are plants that have evolved over years to survive in your exact climate.  Most garden centers will have a section devoted to native plants.

    ]]>

    If your yard has an irrigation system consider switching some or all of it to drip irrigation.  The typical irrigation system uses sprinklers to spray water on your grass and plants.  This leads to a lot of waste as the water will often be sprayed onto sidewalks or the street as well as onto your plants.  Spraying will also generally have runoff, which once again does not benefit your plants.  Drip irrigation is a tiny nozzle that goes right to a plant giving it a slow soaking.  A slow soaking is best for the plant and should have no runoff.

    Also remember to only water your garden early on the morning or late in the afternoon.  Watering in the heat of the day will lead to more evaporation by the sun, and less irrigation for your plants.

    Grey water is a fantastic source to supplement your garden’s irrigation needs.  Grey water is non sewage waste water from your home, including your clothes washer and kitchen sink.  Elaborate grey water systems hook right up to your waste lines and will hold the water for irrigating your yard.  However, a simpler system is simply to use a dishpan to wash your dishes.  Instead of dumping the dirty water down the sink when you are finished take that water out and use it on your plants.  The small amounts of food and soap in the water are beneficial to most plants.

    A rain barrel is an ancient but effective way of saving water.  This is pretty much what it sounds like.  You put large container under your roofs down spout to collect the rain.  Use this water on your plants.  Very easy.

    So there you have a few ideas for conserving water.  Consider trying out one or two of these for your yard, and start saving today!

    Check out my resources for gardening at http://www.GardeningWithLarry.com with listings of local garden centers and specialty mail order nurseries.

    Larry Truett is a freelance PHP and MySQL programmer living in the San Carlos neighborhood of San Diego with his wife and their 3 cats. He enjoys hiking, reading, gardening, watching too much television, and other nerdy activites.

    Article from articlesbase.com

    Find More Water Conservation Tips Articles

  • Water Conservation Tips – 5 Ways To Conserve Water

    Times are tough, and that money could be used for so many other things than financing mop water and leaky toilets. Here are five ways to cut down on your household’s daily use of water and hopefully save you a few bucks!

    1: Cut down on extraneous water flow. It is advised that you should take baths instead of showers or at least limit your time under the spray. Don’t leave the faucet running while you’re brushing your teeth or washing the dishes – instead, fill one sink with soapy water and the other with rinse water.

    2: Check your home and garden for leaks. Even a small leak can have a cumulative effect and cost you big in the long run. Check your faucets, sprinklers, and water meter readings, and test your toilet by putting a little food coloring in the tank – if the color drains down into the bowl, you may need to replace some toilet parts.

    3: Conserve water. Rinse your razor in a small cup, and limit yourself to one bucket for mop water. Only run your washers and dryers when you have a full load. Don’t use your toilet as an ashtray – you waste up to seven gallons of water every time you flush a cigarette or used tissue! Use a trash bag instead.

    4: Re-use water whenever sanity. For example, after rinsing off your vegetables, save that water and use it on your plants. Park uphill when you wash your car – the water will run down your driveway and save you from having to hose it down later.

    5: Keep a jug of cool clean water in the fridge at all times. If you want a drink, you won’t have to waste water waiting for the tap to cool; you can also use it for washing, cleaning, and anything else around the kitchen without having to touch the sink.

    These are just a few tips to get you started. Once you dedicate yourself to saving water (and money!) you’ll see the opportunities everywhere. Don’t be afraid to get your whole family in on it, too – if you can impress your kids with good habits early, they’ll grow up conversing water as second nature. Isn’t that the greatest gift?

    To learn more about water conservation and recycled water use, please visit the CentralBasin website now.

     

    Article from articlesbase.com

    More Water Conservation Tips Articles

  • High-Tech Toilets of the Future: Conservation of Water

    Of all the things going high tech, this is the most unexpected. Yes, after everything, its your toilet this time. High tech toilets are the all new big thing, about to hit the markets sometime soon. The high tech toilets from Japan are already creating waves, their modern age, sensor features. The high tech toilets of the future are bathroom fittings on the same lines.

    Some of the features that are operational right now in the Japanese high tech toilets are as creative as the toilet lid lifting itself up as and when a person approaches it and deciphering whether to stay up or be down. It is fully adjustable, lets one decide the angle of the jet, the temperature of the water, releasing a deodorant to keep away put off the smell. A completely adjustable toilet seat allows a comfortable sitting position for old people and arthritis patients. No toilet paper is required in these high tech future models and an automatic drying follows after the wash.

    But of all the other features of the high tech toilets of the future , the most important one that has not been mentioned till now is a design that allows water conservation. Conserving water is one of the most important environment needs at hand right now. The modern engineered designs are coming up with toilet flushing systems that are low consumption toilet models. They have options for choosing the amount of water that needs to be flushing, sometimes even deciphering themselves how much water to use and how much of pressure. Japan has been one of the leading countries in introducing these spectacular models of outstanding engineering. They are not just examples of beautiful creations in bathroom fitting designs but the high ability flushing systems are also a huge help in conserving water and saving the environment.

    View an interesting photo gallery on Modern Wall Hung Flushing System Designs. Bathroom fitting manufacturers – a B2B portal offers all exhaustive information on all kinds of bathroom fittings. Buyers can request free qoutes from reliable suppliers.

    Article from articlesbase.com

  • Water Conservation And Water Rate Increases

    A recent Sonoma County California case brings to light an interesting relationship between conservation and water utility rates.  Last October, residents of the local Sonoma users undertook some significant conservation measures and were rewarded with an 8% rate increase.  The lead line from a local community radio website then read “Apparently, conserving water won’t necessarily save you money.”  Water Utility Consultants have seen this before.

    The relationship between usage behavior and cost structure provides insight into how this happens.  Typically, utility customers believe that if they conserve water or cut back on water use, they will save money on their water utility bill.  Generally, if the bill is determined by a cost-per-gallon or cost per-unit rate, this may be true.  Consumption of fewer units of whatever is being sold should result in a lower bill to the consumer.  

    By extension, the argument goes, the utility saves money as well because it has to provide fewer “units of product” or in this case, fewer gallons of water to the end consumer.  Common belief seems to hold then that the water provider will enjoy lower costs in direct proportion to reduced production.  And all should be good, right?

    Unfortunately, many utility costs are of the ‘fixed’ variety, meaning that they do not go up or down in proportion to the number of units produced.  Fixed costs include expenses necessary for the utility to continue delivering the water and sewer service, and include things like payroll costs, equipment maintenance, insurance, debt service, and many other costs that won’t change if customers consume fewer gallons of water or produce a reduced volume of sewage or wastewater.

    Utility revenue on the other hand, is a simple function of quantity times price per unit of service.  When customers reduce usage, the result is lower revenue for the provider.  So, while conservation benefits consumers with temporarily reduced charges, the reduction in revenue to the provider causes financial shortfalls that must be made up in some fashion.  Because utilities have so much fixed cost, any reduction in the revenue stream means that the utility will have difficulty meeting its existing and ongoing expense obligations.  Conservation then often reduces – sometimes significantly – the revenue needed by utilities to provide continuing service.

    In summary, customers benefit from their conservation efforts by paying less overall, but the utility loses money.  However, because of their fixed cost structure, utilities cannot survive for very long with expenses greater than revenues.

    What typically occurs at the point where expenses threaten to overrun income is that the utility requests a rate increase to make up for lost revenues.  In the end, these rate increases eliminate any short-term savings generated by customers’ conservation efforts by way of higher per-unit rates.  In other words: if there are fewer units being sold, then the rate per unit is going to be higher to achieve the same level of revenues as before (when there were more units being sold).

    The real solution to avoiding these events is to have a thorough understanding of the expected tradeoffs between conservation and revenue before going into any kind of conservation program.  Rates can be designed in advance to help offset some of the expected losses, thus stabilizing rates to some degree.  Skilled water rate consultants can help design these kinds of rates in advance, and that’s a better approach than waiting to see what happens after the fact.

    StepWise Advisors is comprised of highly efficient and experienced technical and financial planning experts focused on specific needs of water utilities and utility customers. Our principals bring over 35 years of experience analyzing the water utility industry and the needs of its customers. Visit the StepWise Website for the latest water and utility industry news.

    Jason Mumm brings over 15 years of experience analyzing the economics and conditions surrounding the water utility industry and the needs of its customers.

    Article from articlesbase.com

  • Water Conservation in Texas: “It’s everyone’s job!”

    I bought a new home here in Waco in May of 2008. One of the things that caused me to fall in love with the place was a lush lawn of St. Augustine grass. I’m something of a lawn junkie. I enjoy working outside and tending to it. Now, two and a half years later, I fully understand the ramifications for Texas water conservation of having that lawn. If I had built that house instead of buying it, I would not have chosen St. Augustine.

     

    Now don’t get me wrong. There are few things more visually pleasing to me than that lawn, thick and freshly trimmed. If my home was in say, Beaumont, where I worked in television three decades ago, it would be just fine. St. Augustine was developed in Florida for Gulf Coast climates and the rainfall that goes with it. It’s perfect for those areas. Waco? Not so much. Our annual rainfall is about 20 inches per year less than what falls in Beaumont.

     

    The Texas Legislature will, in the session that begins in January, tackle the issue of water. It will be a difficult and contentious process. Water conservation is something that every Texan must take seriously. Time is running out for us to deal with our water problems. Native Texans, and those “getting here as fast as they can,” will nearly double our population by 2050. Our current rate of water usage cannot deal with that many Texans.

     

    Here at the Texas Farm Bureau, we are gearing up for that session with the knowledge that agriculture has both a need for water to produce food and fiber and a responsibility to use it wisely.

     

    The latter point has led to a variety of methods by which agriculture conserves water. The systems that have been developed toward that end include low elevation and low pressure  delivery systems in irrigation that minimize the opportunity for evaporation.

     

    There’s also the now widespread use of conservation tillage. In conservation tillage, including minimum till and no till, the breaking up of the soil is held to a minimum. The moisture that lies near but below the surface does not evaporate as easily. This method can improve water conservation significantly.

     

    But, water conservation is not something that can be left strictly to the big users like farmers and industry. Taken together, the amount of water used by homeowners on lawns is staggering.

     

    If I were starting a lawn today, I’d do it very differently. I’d plant a less thirsty species of grass and I’d consider xeriscape . This is a combination of low water use turf grass, native plants adapted to the drier parts of Texas and even rock and gravel.

     

    Of course, many other water saving ideas are easy to implement. Don’t let that drippy faucet go on another day. Put water savers on those shower heads. Modern toilets work as well as the older models while using less water.

     

    I’m not a farmer and I don’t play one on TV. I do, however, work for farmers and I’ve seen first-hand the steps that are being taken to conserve water. Conservation tillage and new irrigation technology is only a part of that.

     

    As a homeowner, I keep up with water leaks and try to avoid wasting any. I have long range plans to replace that elegant lawn. Water conservation is everyone’s job today.

    Gene Hall is Public Relations Director for the Texas Farm Bureau and a regular contributor for the Texas Ag Talks blog. He writes on a variety of topics including Texas water conservation, organic farming, and agriculture trade.

    Article from articlesbase.com

    More Water Conservation Articles

  • Home Energy Saving Tips – 7 Conservation Ideas To Insulate Your Windows

    Article by Ibrahim Saeed

    With all the home energy saving tips and conservation ideas available today, some homeowners and renters alike may not know what area of their home to address first. Consider this, according to the U.S Department of Energy your home windows are single handedly responsible for up to 25% of the total amount of wasted or lost energy.

    Windows provide much visible and decorative appeal. However windows are heat loss and heat gains best friend. Just consider how much better insulated the interior of your home would be without any windows, just walls.

    No need to permanently seal your windows. After all windows provide many other needed things aside from just a view, like ventilation, natural lighting and even free solar heat during the winter months.

    Fortunately there are several more sensible approaches to reducing heat gain and heat loss at the window. Here are 7 no cost and low cost home energy saving tips and conservation ideas that will significantly insulate your windows, reducing costly heat loss and heat gain.

    7 Home Energy Saving Tips To Insulate Your Windows

    Inspect the caulk around all of your windows. If you can identify cracks, even small cracks, then reapply caulk to seal them. Cracks are a clear indication of moisture build up and moisture build up indicates air leakage. This should be preformed at least twice a year. Take a look at the weather stripping around your windows. While you’re at it check your front, back and patio doors too. This is often over looked; weather stripping should be reapplied at least every other year, especially on windows and doors that are in high traffic areas. During the summer and spring months, consider making the habit of closing window coverings (curtains, drapes) on south and west facing windows during the peak sun light hours of the day. Your windows facing south and west are exposed to direct sunlight several hours longer than your windows facing north and east. This will reduce unwanted solar heat from penetrating your home and give your cooling system a break. Consider decorating your windows with light colored curtains, shades and drapes during the summer and spring months. White and light shaded curtains naturally and effortlessly reflect unwanted heat away from the inside of a home. During the winter and fall months, get into the habit of opening window coverings on south and west facing windows during the daytime, especially south facing windows. This will allow the suns natural heat to penetrate your home and give your heating system a much deserved break. Always keep your window coverings closed at night during the winter and fall months. And if your decorative taste permits, use tight fitting window treatments on all windows during the heating season to enhance insulation. Consider using an array of energy saving window treatments and coverings. There are several year round window coverings such as cellular shades and some exterior treatments that can reduce heat gain by as much as 86% and heat loss by as much as 80%.

    Some of these energy saving tips and conservation ideas are completely cost free measures. Some of these tips call for relatively inexpensive up front costs. Feel free to adopt the measures you see fit for your home.

    About the Author

    For some saving energy at home is fueled by environmental concerns, but the savings from conserving is what interests us all. Allow me to be your home energy savings guide. I provide the average homeowner with the energy saving tips and conservation ideas that are sure to lower their utility bills for years to come.

    www.nwf.org There are some simple and easy ways to “green” your home and save energy. David Mizejewski explains what you can do inside.

  • Energy Saving Tips – Home Conservation Ideas For Lighting

    Article by Ibrahim Saeed

    Consider these home energy saving tips and conservation ideas and lower your lighting costs and save electricity. According to the U.S department of Energy, the electricity used just for home lighting on average accounts for over 10% of the total household energy used.

    With a combination of proper techniques and new lighting technologies, any homeowner can make significant improvements and increase the energy efficiency of their indoor home lighting.

    The most cost efficient way to reduce the amount of electricity used to light your home is to simply increase and maximize the amount of natural light that enters your home. The new age of home construction and interior design is maximizing natural lighting by placing heavy focus on spacious living spaces coupled with the right furnishing and the right window treatments.

    With that said, you don’t have to take on an expensive remodel or hire a professional interior designer to get started. Maximizing natural light coupled with new energy efficient lighting will significantly reduce the cost of lighting in any home. Here are some home energy saving tips and conservation ideas that are sure to reduce your home lighting costs.

    Energy Saving Tips And Conservation Ideas For Home Lighting

    First and foremost, keep your windows as clean and clear as possible. Just cleaning your windows can improve transparency by as much as 20%.When decorating a room, take into consideration the direction of the room. South and west facing rooms receive plenty of natural light. So if you’re decorative taste calls for darker colored window treatments, paints and furnishings, consider these rooms first. Use lighter and more transparent colors in east and north facing rooms to further maximize on the limited amount of natural light these rooms receive. In general avoid using dark and heavy curtains and drapes. Instead consider energy saving window treatments such as cellular or honeycomb shades. These treatments actually reduce costly heat loss and heat gain better and there considerably more transparent than dark curtains and drapes.Switch to energy star certified CFL light bulbs. Start with the most used light fixtures through out the house. Bedroom lamps and living room lamps generally make good choices.CFLs are not all the same. They come in different shapes and sizes, some types are designed for certain type of light fixtures. Knowing these differences will maximize the energy efficiency of your home lighting. CFL light bulbs are efficient because there designed to use considerably less electricity (measured in watts) to produce the same amount of light (measured in lumens). When making the switch this must be considered. In short replace a 60 watt traditional bulb with about a 13 watt CFL bulb.

    About the Author

    For some saving energy at home is fueled by environmental concerns, but the savings from conserving is what interests us all. Allow me to be your home energy savings guide. I provide the average homeowner with energy saving tips and conservation ideas that are sure to lower their utility bills for years to come.

  • Water Conservation

    Article by Lucas

    Ten easy ways to conserve water

    Conservation is storing of something. Water conservation is a storage of water and using it only when needed. We should always remember that there are many places on Earth where there is scarcity of water and people have to struggle hard to find even a single bucket of water. We can’t solve this unequal distribution problem but at least try not to misuse water. Given below are some easy and fast water conservation techniques that you can adopt to conserve water in your home.

    1. Conserving rain water: You can conserve rain water by storing it in buckets, pots, small ditches. That water can be used to water your plants, your garden and use it for washing vegetables and utensils etc. In all you can use it to serve your household purpose.2. Keep the indoor plants outside during the rains: Whenever it rains keep all your indoor plants out side your house. This is because the plants will get water naturally and no extra water will be required to water them later.3. Timely water your plants and lawn: It is better to water your lawn and your garden from 8pm to 8am. This is because the evaporation rate of water is minimum during this time. Otherwise if watered during the day, the scorching heat of the Sun will evaporate more amount of water and leave your garden and lawn dry very quickly so that you have water them again and again.4. Use natural fertilizers: Chemical fertilizers help to grow the plants at a much faster rate but this requires a lot of water along with the chemical fertilizers. But if no fertilizer is use or only manure is used the growth rate will be slow but water consumption will much less.5. Grow the grass longer: Try to keep your grass long in your garden especially during the hot summer days. The grass retains the moisture in your garden and thus you do not have to water the garden frequently. The other plants ill also not wither. With some adjustments to your lawn mower the grass can be kept longer.6. Do not leave tap running: While doing kitchen work or in the bathroom never leave the tap water running. It is a bad habit to keep it open and do the work. Close it whenever not required. Use buckets to take bath as that would give you the idea how to use water carefully.7. Use sprinklers for watering: Water conservation can be done by using sprinklers to water your garden. Simple pipes when used leads to a lot of misuse of water. That is also not the correct way to water your delicate plants.8. Use hand to water: Rather than using sprinklers it is best to use your hand to water your plants. That would conserve a lot of water.9. Do not leave the hose pipe running: While using the hose for washing your lawn or your car never leave the hose pipe running. Use the pipes that have adjustments or stopcocks at the mouth of the pipe. So that whenever you require you stop the water flow.10. Do not play with water: Water conservation can be done if you do not allow your children to play with water.

    About the Author

    Lucas has been writing articles online for nearly 2 years now. Not only does this author specialize in skin care, nutrition, and healthy skin, you can also check out latest website about

    Airbrush Compressor KitsWhich reviews and lists the best

    Air Brush Kits